wclBluetoothLeEddystoneTlmFrameEvent Delegate

public delegate void wclBluetoothLeEddystoneTlmFrameEvent(
	Object Sender,
	long Address,
	long Timestamp,
	sbyte Rssi,
	uint AdvCnt,
	ushort Batt,
	uint SecCnt,
	double Temp,
	byte[] Data
)

Public Delegate Sub wclBluetoothLeEddystoneTlmFrameEvent ( 
	Sender As Object,
	Address As Long,
	Timestamp As Long,
	Rssi As SByte,
	AdvCnt As UInteger,
	Batt As UShort,
	SecCnt As UInteger,
	Temp As Double,
	Data As Byte()
)

public delegate void wclBluetoothLeEddystoneTlmFrameEvent(
	Object^ Sender, 
	long long Address, 
	long long Timestamp, 
	signed char Rssi, 
	unsigned int AdvCnt, 
	unsigned short Batt, 
	unsigned int SecCnt, 
	double Temp, 
	array<unsigned char>^ Data
)

Parameters

Sender  Object

The object initiates the event.

Address  Int64

The Bluetooth LE advertiser's MAC address.

Timestamp  Int64

The frame's timestamp in Universal Time format.

Rssi  SByte

The measured RSSI value in dBm at range between -100 dBm and +20 dBm at 1 dBm resolution.

AdvCnt  UInt32

The running count of advertisement frames of all types emitted by the beacon since power-up or reboot, useful for monitoring performance metrics that scale per broadcast frame. If this value is reset (e.g. on reboot), the current time field is also reset.

Batt  UInt16

The current battery charge in millivolts, expressed as 1 mV per bit. If not supported (for example in a USB-powered beacon) the value should be zeroed.

SecCnt  UInt32

The 0.1 second resolution counter that represents time since beacon power-up or reboot. If this value is reset (e.g. on a reboot), the AdvCnt count field is also reset.

Temp  Double

The beacon temperature in degrees Celsius sensed by the beacon. If not supported the value is -128 °C.

Data  Byte

The additional frame data.

Reference