wcl |
The wclGattClientConnection type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | Connect(UInt32) | Connects to a remote device. (Inherited from wclClientConnection) |
| Connect(Int64, Boolean, Boolean) | Connects to a remote device. |
| Disconnect | Disconnects from the connected remote device. (Inherited from wclClientConnection) |
 | DoCharacteristicChanged | Fires the OnCharacteristicChanged event. |
| DoConnect | Fires the OnConnect event. (Inherited from wclClientConnection) |
| DoConnectionParamsChanged | Fires the OnConnectionParamsChanged event. |
| DoConnectionPhyChanged | Fires the OnConnectionPhyChanged event. |
| DoDisconnect | Fires the OnDisconnect event. (Inherited from wclClientConnection) |
| DoMaxPduSizeChanged | Fires the OnPduMaxSizeChanged event. |
| Enter | Enters the connection's critical section. (Inherited from wclCustomConnection) |
| Equals | Determines whether the specified Object is equal to the current Object. (Inherited from Object) |
| Finalize | Frees the connection. (Inherited from wclClientConnection) |
| GetConnectionParams | Gets the current connection parameters. |
| GetConnectionPhyInfo | Reads the Bluetooth LE physical layer (PHY) information. |
| GetHashCode | Serves as a hash function for a particular type. (Inherited from Object) |
| GetMaxPduSize | Reads the maximum PDU size for the current connection. |
| GetType | Gets the Type of the current instance. (Inherited from Object) |
| HalCommunicate | Implements a hardware-dependent code that communicate with the
connected remote device. (Inherited from wclClientConnection) |
| HalConnect | Implements a hardware-dependent code that connects to a
remote device. (Overrides wclClientConnectionHalConnect(IntPtr)) |
| HalDisconnect | Implements a hardware-dependent code that disconnects from the
connected remote device. (Overrides wclClientConnectionHalDisconnect) |
| HalGetConnectionParams | Implements a hardware-dependent code to get the current connection parameters. |
| HalGetConnectionPhyInfo | Implements a hardware-dependent code to reads the Bluetooth LE physical layer (PHY) information. |
| HalGetMaxPduSize | Implements a hardware-dependent code to reads the maximum PDU size for the current connection. |
| HalReadCharacteristics | Implements a hardware-dependent code for reading the characteristics available for the specified service. |
| HalReadCharacteristicValue | Implements a hardware-dependent code for reading the value of the specified characteristic. |
| HalReadDescriptors | The method reads all the descriptors available for the specified characteristic. |
| HalReadDescriptorValue | Implements a hardware-dependent code for reading the value of the specified descriptor. |
| HalReadIncludedServices | Implements a hardware-dependent code for reading the included services available for a given service. |
| HalReadServices | Implements a hardware-dependent code for reading available services from a remote Bluetooth LE device. |
| HalSetConnectionParams(wclBluetoothLeConnectionParametersType) | Implements a hardware-dependent code to request the connection parameters change to the specified preferred connection parameters. |
| HalSetConnectionParams(wclBluetoothLeConnectionParametersValue) | Implements a hardware-dependent code to request the connection parameters change to the specified preferred connection parameters. |
| HalSubscribe | Implements a hardware-dependent code to subscribes for the characteristic changes notifications. |
| HalUnsubscribe | Implements a hardware-dependent code to unsubscribes from the characteristic changes notifications. |
| HalWriteCharacteristicValue | Implements a hardware-dependent code to write the specified characteristic value to the Bluetooth device. |
| HalWriteDescriptorValue | Implements a hardware-dependent code to write the specified descriptor value to the Bluetooth device. |
| InternalDisconnect | The internal disconnect method. Disconnects from a
connected remote device. (Inherited from wclClientConnection) |
| Leave | Exists *leaves) the connection's critical section. (Inherited from wclCustomConnection) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
| MessageReceived | The method called when a new notification message
received. (Overrides wclClientConnectionMessageReceived(wclMessage)) |
| NotifyClosed | Send a Disconnect notification message. (Inherited from wclClientConnection) |
| PrepareForConnection | The method called internally before connection. |
| ReadCharacteristics | The method reads all the characteristics available for the specified service. |
| ReadCharacteristicValue | The method reads the value of the specified characteristic. |
| ReadDescriptors | The method reads all the descriptors available for the specified characteristic. |
| ReadDescriptorValue | The method reads the value of the specified descriptor. |
| ReadIncludedServices | The method reads all the included services available for a given service. |
| ReadServices | Reads available services from a remote Bluetooth LE device. |
| SetConnectionParams(wclBluetoothLeConnectionParametersType) | Request the connection parameters change to the specified preferred connection parameters. |
| SetConnectionParams(wclBluetoothLeConnectionParametersValue) | Request the connection parameters change to the specified preferred connection parameters. |
| Subscribe | Subscribes for the characteristic changes notifications. |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Unsubscribe | Unsubscribes from the characteristic changes notifications. |
| WriteCharacteristicValue | The method writes the specified characteristic value to the Bluetooth device. |
| WriteClientConfiguration | Writes the client configuration descriptor to the device. |
| WriteDescriptorValue | The method writes the specified descriptor value to the Bluetooth device. |
See Also