wclBluetoothLeBeaconWatcherDoEddystoneTlmFrame Method |
Fires the OnEddystoneTlmFrame event.
Namespace: wclBluetoothAssembly: wclBluetoothFramework (in wclBluetoothFramework.dll) Version: 7.17.12.0 (7.17.12.0)
Syntax protected virtual void DoEddystoneTlmFrame(
long Address,
long Timestamp,
sbyte Rssi,
uint AdvCnt,
ushort Batt,
uint SecCnt,
double Temp,
byte[] Data
)
Protected Overridable Sub DoEddystoneTlmFrame (
Address As Long,
Timestamp As Long,
Rssi As SByte,
AdvCnt As UInteger,
Batt As UShort,
SecCnt As UInteger,
Temp As Double,
Data As Byte()
)
protected:
virtual void DoEddystoneTlmFrame(
long long Address,
long long Timestamp,
signed char Rssi,
unsigned int AdvCnt,
unsigned short Batt,
unsigned int SecCnt,
double Temp,
array<unsigned char>^ Data
)
Parameters
- Address Int64
- The Bluetooth LE advertiser's MAC
address.
- Timestamp Int64
- The frame's timestamp in Universal Time
format.
- Rssi SByte
- The measured RSSI value in dBm at range between -100
dBm and +20 dBm at 1 dBm resolution.
- AdvCnt UInt32
- The running count of advertisement frames of all
types emitted by the beacon since power-up or reboot, useful for
monitoring performance metrics that scale per broadcast frame.
If this value is reset (e.g. on reboot), the current time field is
also reset.
- Batt UInt16
- The current battery charge in millivolts, expressed
as 1 mV per bit. If not supported (for example in a USB-powered
beacon) the value should be zeroed.
- SecCnt UInt32
- The 0.1 second resolution counter that represents
time since beacon power-up or reboot. If this value is reset (e.g. on
a reboot), the AdvCnt count field is also reset.
- Temp Double
- The beacon temperature in degrees Celsius sensed by
the beacon. If not supported the value is -128 °C.
- Data Byte
- The additional frame data.
See Also